Surface Preparation - Rust Preventatives

PRODUCT

MSDS

FEATURES/APPLICATIONS

WATER-BASED
Typical Protection: 7-8 Weeks

BIOLUBE GR #4	Y	Economical. No SARA 313 reportables.
COMPOUND LT	Y	Outstanding in leak testing applications.
COMPOUND RP-13	Y	Excellent inhibitor on ferrous parts. No SARA 313 reportables.
COMPOUND RP-15	Y	Excellent inhibitor on ferrous parts.
COMPOUND RP-100	Y	Economic inhibitor.
COMPOUND RP-111	Y	Film is less noticeable than COMPOUND RP-13. No SARA 313 reportables.
DART 299	Y	Sodium nitrite based. Nearly invisible.

VOLATILE
Protection: During wetness – prevents corrosion while part is wet
and drying down. When completely dry, it has evaporated.

COMPOUND RP-93	Y	For drying operation. Leaves no residue.
COMPOUND RP-M	Y	For drying operation. Leaves no residue.

OUTDOOR PROTECTION
Typical Protection: 2000 Hours of 5% Salt Spray
Testing per ASTM B-117*

COMPOUND RP-WS

Long term indoor or outdoor protection and during domestic and international shipments.

SOLVENT-BASED, WATER DISPLACING
Typical Protection: 6+ Months

COMPOUND A-97P	Y	Quick dry time.
COMPOUND A-97P-HF	Y	Higher flash point version of COMPOUND A-97P. Slower dry time.
COMPOUND RP-25	Y	Twice the active rust inhibitor than COMPOUND A-97P.
COMPOUND RP-80 PLUS	Y	Version of COMPOUND A-97P with thicker, waxy film.
COMPOUND RP-90	Y	No D.O.T. flammable; no RCRA hazardous waste; no SARA 313's; low VOC.
COMPOUND RP-C	Y	Economical version of COMPOUND A-97PHF.

OIL, EMULSIFIABLE
Typical Protection: 3-4 Months

DART 130	Y	5% by vol. is sufficient to pass 30 days of humidity testing.
SOLVOL E	Y	Outstanding when absorbed into a zinc phosphate coating to provide superior effectiveness in salt spray testing of unpainted surfaces. "Phosphate & Oil Operation"
SOLVOL 107	Y	5% by volume provides > 700 hours of protection cold-rolled steel test panels subjected to 95% relative humidity 100°F.
SOLVOL 107-D	Y	Excellent for resistance to ASTM D1735 water fog testing. Product of choice for parts transported from one plant to another.