|
PRODUCT |
MSDS | FEATURES/APPLICATIONS |
|
HOT PAINT STRIPPING – Aqueous, Alkaline Typical Usage Temperature: 180°F. to boiling |
|
DART 817 |
Y | Contains solvent accelerators, chelates and surfactants. |
|
STRIPPER L-269 |
Y | Contains solvent accelerators, chelates and surfactants. |
|
STRIPPER 07-DF |
Y | Low foam, used in purging paint spray booths, tanks, paint lines, and tank lines. |
|
LIQUISTRIP AV-3 |
Y | Contains solvent accelerators and chelates. |
|
LIQUISTRIP DG |
Y | Contains solvent accelerators, chelates and surfactants. Economical & most popular. |
|
LIQUISTRIP GAV |
Y | Contains solvent accelerators, chelates and surfactants. High performance. |
|
STRIPPER #1 |
Y | Alkaline contains solvents, chelates, and surfactants. |
|
STRIPPER VB-1X |
Y | Mildly alkaline – good for lacquers and varnishes. Use from ambient to 180°F. |
| Liquid Additives |
|
ADDITIVE G |
Y | Contains solvents, chelates, and surfactants. |
|
ADDITIVE LP |
Y | Contains solvents and surfactants. |
|
DART 343 |
Y | Contains chelate only. Use in pigment rinsing problems or when rust removal is desired. |
|
COMPOUND 194 |
Y | Contains solvents, chelates, and surfactants. |
| SOLVENT PAINT
STRIPPING – Non-Methylene Chloride Usage Concentration: 100% |
|
BIOSTRIP 1 |
Y | Replaces flammable and odoriferous solvents, methylene chloride, or hot caustic type stripper in removal of organic coatings and inks. |
|
STRIPPER ME |
Y | Replaces flammable and odoriferous solvents, methylene chloride, or hot caustic type stripper in removal of organic coatings and inks. |
|
STRIPPER R |
Y | Replaces flammable and odoriferous solvents, methylene chloride, or hot caustic type stripper in removal of organic coatings and inks. |
|
STRIPPER T |
Y | Replaces flammable and odoriferous solvents, methylene chloride, or hot caustic type stripper in removal of organic coatings and inks. |
|
COMPOUND HST-16 |
Y | Two-phase system that dissolves paints without attacking the substrate. |
