Madison Chemical, Engineering The Cleanest Solutions For You!

Madison Chemical, Engineering the Cleanest Solutions for You!

Navigation

Industries Served

Manufactured Products

Featured Products

Surface Preparation

Surface Preparation - Mass Finishing

All Files Are In Adobe Reader Format (pdf)

FULL LINE COMPARISON CHART FOR MASS FINISHING

* REFER TO LEGEND AT BOTTOM OF TABLES

BURNISHING
Polishing, improving surface coloring and/or brightness

PRODUCT	MSDS	TYPE (ACID, ALKALINE OR NEUTRAL)	VIBRATORY CONCENTRATION	METAL SAFETY*	RUST PREVENTION*
COMPOUND BC-11L	Y	Alkaline	0.5 - 2% BY VOL.	■	●
COMPOUND BC-15LC	Y	Alkaline	0.5 - 2% BY VOL.	■	●
COMPOUND BC-15R	Y	Alkaline	0.5 - 2% BY VOL.	■	●
COMPOUND BC-25	Y	Neutral	0.5 - 2% BY VOL.	■	¤
COMPOUND BC-99	Y	Alkaline	0.5 - 2% BY VOL.	■	●
COMPOUND BC-A	Y	Acid	0.5 - 2% BY VOL.	■	¤
COMPOUND BC-92A	Y	Alkaline	1 - 2 OZ. PER GAL.	■	¤
COMPOUND BC-103	Y	Alkaline	1 - 2 OZ. PER GAL.	■	¤
COMPOUND P-75-HF	Y	Alkaline	1 - 2 OZ. PER GAL.	■	¤

*TABLE LEGEND

●	APPLICABLE
¤	APPLICABLE UNDER CERTAIN CONDITIONS
■	FERROUS, ALUMINUM AND ZINC ALLOYS
¨	FERROUS ALLOYS ONLY

DEBURRING
Smoothing of sharp edges and projections

PRODUCT	MSDS	TYPE ACID, ALKALINE OR NEUTRAL)	VIBRATORY CONCENTRATION	METAL SAFETY*	FEATURES/ APPLICATIONS
COMPOUND DBR-17	Y	Acid	1 - 3 OZ. PER GAL.	■	Oxalic acid chemically accelerated.
COMPOUND TU-VB	Y	Alkaline	1 - 2 OZ. PER GAL.	■	Rust prevention under certain conditions.
DART 312	Y	Alkaline	1 - 3 % BY VOL.	■	Rust prevention under certain conditions.
DART 312-RP	Y	Alkaline	1 - 3 % BY VOL.	■	Provides rust prevention.

ABRASIVE DEBURRING

PRODUCT	MSDS	TYPE (ACID, ALKALINE OR NEUTRAL)	VIBRATORY CONCENTRATION	METAL SAFETY*	ABRASIVE DESCRIPTION
CLEAN CUT	Y	Alkaline	1 - 3 % BY VOL.	■	Silica flour-smaller particles than COMPOUND CDB SPECIAL.
COMPOUND CDB-8	Y	Alkaline	1 - 3 % BY VOL.	■	Pumice.
COMPOUND CDB-183	Y	Alkaline	1 - 3 % BY VOL.	¨	Sand/pumice-faster cutting.
COMPOUND DB-10	Y	Alkaline	1 - 4 OZ. PER GAL WITH MEDIA	¨	Sand-faster cutting.

*TABLE LEGEND

●	APPLICABLE
¤	APPLICABLE UNDER CERTAIN CONDITIONS
■	FERROUS, ALUMINUM AND ZINC ALLOYS
¨	FERROUS ALLOYS ONLY

Technical Request Form

© 2010 Madison Chemical Co., Inc. Telephone: 812-273-6000 Madison, Indiana, USA. All Rights Reserved.